Vantage-HD
	Manuals & Technical Information

Please find below links to the Vantage manuals and interactive manual.  You will need Adobe Acrobat reader to read the manuals.

 

FULL HDCP COMPLIANCE: The Connection/HDCP status LED (Left-most LED) now indicates the following conditions:

 

• OFF:  No valid input signal detected;
• GREEN: Non-HDCP protected input signal detected - Non-HDCP protected input signals can be viewed at any output resolution on any display;
• AMBER PICTURE:HDCP protected input signal detected - Limited Output mode - If a selected input signal is HDCP protected and the connected display is not HDCP certified then the protected signal can only be viewed when the output resolution selection is no greater than 480 lines.  Anything above will result in a HDCP protected blank indicated by an Amber/Yellow screen and RED status LED;
• RED: HDCP protected input signal detected - HDCP certified Display found - If a selected input signal is HDCP protected and the display is HDCP compatible, there will be no limits on the choice of output resolution.

 

 

Interactive manual.

 Vantage Manual100 

Please note, to use the interactive manual, please right click on the above, select 'Save target as' and then save to your PC.  Once saved double click to run