PremierViewPro-LED is a very flexible image scaler developed specifically for driving full-colour LED displays from video or graphics sources. PremierViewPro-LED features best in class image quality and superb scaling quality. Video image stability and motion performance is superb with outstanding motion compensated video processing and flicker reduction as well as 3:2 and 2:2 pull-down correction for film-originated source material.
PremierViewPro-LED is in use World-wide in fixed installations and in rental/staging environments. It is used and recommended by several major manufacturers of LED screens and is widely recognised as providing the very best possible LED image scaling solution and doing so at a competitive price-point.
Output image sizing is very easily controlled for quick and simple configuration to drive any LED screen from 192x144 through to 1280x1024 active image size. The output image may also be zoomed and panned to select a particular area of interest. Actual minimum and maximum achievable image sizes are dependent on input and output resolutions selected.
PremierViewPro-LED uses a very flexible high performance video input front end including true
component video support in analogue YPbPr and RGB colour space and SDI SMPTE259M digital
formats as well as dual composite (CVBS) and one YC/S-Video input. A very high performance video
decoder is utilised with 2x oversampling and active comb filter for outstanding video image clarity.
Computer graphics inputs are also accepted in SVGA analogue and DVI digital formats.
The output format can be set to Video Frame Lock mode where it will automatically switch between
50Hz and 59.94Hz depending on the input signal type so as to optimise motion performance and to reduce flicker in on-camera in
live-TV situations, or can be set to a fixed output frame rate for driving basic LED screens which are not
50Hz-compatible.
An optional Genlock module can be fitted which allows any pre-defined output resolution to be vertically
genlocked to a 625i or 525i sync signal applied via the S input on the rear panel. (Note: S input also
doubles as sync input for RGBS/YPbPrS component video signals). When Genlock is enabled and a
valid Genlock sync has been detected, the chosen Video I/O lock setting and chosen output refresh rate
will be automatically overridden and the output will run locked to the field sync present on the Genlock
signal.
Outputs are available in VGA analogue and DVI digital formats which are useable simultaneously so
that one output can drive the LED screen while the other runs a local monitor for applications where the
LED screen is not visible from where the scaler is situated.
System control is via a front-panel LCD menu controlled via an easy to use jog-wheel or through an
intuitive application for WIn2K or WinXP connected via a normal RS232 serial port. This control software is included with PremierViewPro-LED for no extra cost.
;)